The secret to soft washing for stone & stone veneer is using the right method, not the most pressure. In Tracy, MN, we match the cleaner and pressure to the surface so it comes out clean without damage. On stone & stone veneer, the method we use is low-pressure wash.
The right method for the job
Cleaning solution: A pH-appropriate stone cleaner or soft wash, tested on a small area first.
Cleaning stone & stone veneer safely
Natural stone and manufactured stone veneer vary a lot. Manufactured veneer is cast concrete with a colored surface that high pressure can wear off, and limestone and sandstone are softer than granite.
Avoid: High pressure on manufactured veneer, and acidic cleaners on limestone, marble and other calcium-based stone.
How often: Every 2-3 years.
When to book soft washing for stone & stone veneer
- Green, black or gray film on siding, especially on the north side
- Black streaks running down the roof
- Moss or lichen on shingles or tile
- A musty smell around shaded walls
- Pressure washing would damage the surface
Where the grime comes from
- Algae, mold and mildew that grow in shade and humidity
- Roof algae that feeds on the limestone filler in shingles
- Pollen and dust that give growth something to hold on to
- Sprinklers and gutters that keep walls damp
What you can do yourself
- Trim back branches and shrubs that touch the house so walls can dry
- Keep gutters clear so water doesn't overflow down the siding
- Spot-clean small areas with a soft brush and mild detergent
- Aim sprinklers away from the house
Not sure what you're looking at? The free stain identifier and safe pressure guide explain each stain and surface.
What can go wrong with DIY pressure washing
- Using too strong a mix, which can burn plants and fade surfaces
- Using too weak a mix, which leaves growth alive and it returns quickly
- Climbing ladders with a spray wand and chemicals
- Mistaking soft washing for 'pressure washing on low'
Our process for soft washing for stone & stone veneer
- Identify the surfaces and the type of growth
- Pre-wet plants, cover sensitive fixtures and close windows
- Apply a solution mixed for the surface and let it dwell
- Rinse at low pressure from the top down
- Rinse plants again and check every side with you
Typical soft washing for stone & stone veneer prices
What moves the price:
- Size: square footage of siding, roof or flatwork
- Condition: heavy growth, old stains and peeling finishes take longer
- Access: number of stories, roof pitch, slopes and how close we can park
- Add-ons: sealing, gutter brightening and other services done in the same trip
These are typical U.S. ranges, not a quote. You get an exact price before any work starts. For a quick estimate, try the pressure washing cost calculator.
Other services for stone & stone veneer
- House Washing for Stone & Stone Veneer
- Graffiti Removal for Stone & Stone Veneer
- Efflorescence Removal for Stone & Stone Veneer
- Commercial Pressure Washing for Stone & Stone Veneer
Serving Tracy, MN and nearby towns
In Minnesota, snow and slush that sit against the house leave a band of grime and mildew along the lower siding, and shaded north walls stay damp long after the thaw. A spring soft wash removes winter grime before it bakes on over the summer.
Much of Minnesota has hard water. Sprinklers and misters leave white mineral spots on walls, windows, fences and pool tile, and those spots need a mineral-safe cleaner, not more pressure.
We provide soft washing for stone & stone veneer across Tracy (ZIP code 56175) and nearby towns including Marshall (17 mi), Slayton (18.3 mi), Springfield (31.9 mi) and Redwood Falls (32.6 mi). Call (555) 010-0000 for a free quote in Tracy.
Soft Washing for Stone & Stone Veneer: frequently asked questions
How much does soft washing for stone & stone veneer cost in Tracy, MN?
Soft Washing for Stone & Stone Veneer typically costs $300-$800 for a typical single-family home exterior, and usually takes 2-4 hours. The exact price depends on the size and condition, and you get it before any work starts. Call (555) 010-0000 for a free quote.
Do you use high pressure for soft washing for stone & stone veneer?
For stone & stone veneer: soft wash for veneer; up to about 1,500 PSI on solid natural stone, depending on the stone. What we avoid: high pressure on manufactured veneer, and acidic cleaners on limestone, marble and other calcium-based stone. The cleaning solution does most of the work, followed by a gentle rinse.
Is soft washing for stone & stone veneer safe for my plants and pets?
We pre-wet plants and lawns, keep cleaning solutions diluted to what the surface needs, and rinse landscaping again when we finish. Keep pets and children inside until surfaces are rinsed and dry.
How often should I schedule soft washing for stone & stone veneer?
Every 2-3 years. Shade, nearby trees, humidity and heavy traffic mean more frequent cleaning; sunny, dry spots can go longer. Our free cleaning frequency tool gives a recommendation for your climate.
What if it rains on the day?
Light rain doesn't stop most washing, but heavy rain, high wind, lightning and freezing temperatures do. If the weather isn't right, we reschedule at no charge. Our work is backed by a satisfaction guarantee.